Diamond core drill company list

This page provides an overview of diamond core drill manufacturers, covering product features and company information for each brand. Use it as a reference to find the equipment that best fits your business needs.

CONSEC

Through its manufacturing division HAKKEN, CONSEC offers a purpose-built lineup that spans compact lightweight units to large-diameter machines. On-site clutch torque adjustment and dry drilling options make it a brand known for straightforward operational planning on the jobsite.

It is well suited for facility retrofit and indoor renovation work where a mix of hole sizes is common. Contractors who need to stay on schedule will find CONSEC a particularly good match.

About CONSEC

Company Name	CONSEC CORPORATION
Established	1967
Headquarters	4-6-8 Shoko Center, Nishi-ku, Hiroshima-shi, Hiroshima Prefecture, Japan
Sales Network	An extensive domestic network of 33 locations across Japan, with overseas subsidiaries in Taiwan, China, and other markets

Hilti

Hilti's tools are built to simultaneously improve productivity and maintain safety on large-scale jobsites. Automated drilling with advanced digital controls and kickback prevention are designed to contribute to reduced labor requirements and lower risk during high-volume coring operations.

Hilti is well suited for large-scale infrastructure projects where hundreds of holes must be drilled consecutively under strict safety standards and high productivity demands. The design keeps work moving without relying on individual operator skill.

About Hilti

Company Name	Hilti Corporation (Hilti Group)
Established	1941
Headquarters	Feldkircher Strasse 100, 9494 Schaan, Liechtenstein
Sales Network	Operations in more than 120 countries worldwide, with a primarily direct sales model

Husqvarna

Husqvarna diamond core drills cover a wide range of jobsite demands, from small-diameter handheld work to heavy-duty large-diameter coring. High output combined with a lightweight build, plus operator-assist features that monitor feed pressure, are standout strengths.

The lineup handles everything from drainage and ventilation holes to high-load large-bit coring. It is well suited for large-scale civil work and jobsites where hole sizes vary and equipment needs to be repositioned frequently.

About Husqvarna

Company Name	Husqvarna AB (publ) (Husqvarna Construction brand)
Established	1689
Headquarters	Hälsingegatan 49, Stockholm, Sweden
Sales Network	Authorized dealers and service workshops accessible through the Dealer Locator on the official website

Tyrolit

Tyrolit's diamond core drill lineup has clearly defined roles for each model—from lightweight, easy-to-handle compact units to high-power machines for large-diameter work. The proprietary diamond grain distribution technology sustains superior cooling performance and consistent cutting efficiency.

The broad lineup makes it easy to select the right tool for the hole size and load demands of each job. It is well suited for contractors who handle a wide mix of work, from small MEP projects to heavy civil applications.

About Tyrolit

Company Name	Tyrolit
Established	1919
Headquarters	Swarovskistrasse 33 | 6130 Schwaz, Austria
Sales Network	More than 140 sales companies worldwide, including direct operations in 29 countries and partner networks in 65 countries

Dongcheng M&E Tools

Dongcheng M&E Tools offers a lineup with clear role separation—from highly mobile handheld models to stationary large-diameter machines. The range is designed to make it easy to select the right model for the hole size and load demands of each jobsite.

Features such as variable speed and overload protection are built in, with consistent attention to operator ease of use and jobsite safety.

About Dongcheng M&E Tools

Company Name	Dongcheng M&E Tools
Established	1995
Headquarters	Jiangsu Province, China (a Shanghai headquarters could not be confirmed on the official website)
Sales Network	More than 80 countries and regions worldwide

CAYKEN

CAYKEN is a brand dedicated to drilling and cutting equipment, with diamond core drills at the core of its lineup. It is well suited for contractors who already own a primary machine and need to add mid-diameter coring capacity for MEP penetrations and renovation work.

Gear switching, overload protection, and other safety and control features come standard on the majority of models. It is also a brand worth putting on the shortlist when the goal is to expand the number of drills available without a heavy upfront investment.

About CAYKEN

Company Name	Shanghai Chengxiang Electromechanical Co., Ltd. (CAYKEN brand)
Established	Not listed on the official website
Headquarters	No. 2993, Gonghexin Road, Shanghai, China
Sales Network	More than 110 countries, over 5,000 global customers. Worldwide Partners program and dealer recruitment ongoing. (As of March 23, 2026)

VEVOR

VEVOR offers a broad professional-grade lineup that spans lightweight handheld models, large-diameter stand machines, and wet/dry combination types. Operators can select the model with exactly the performance they need based on jobsite space constraints and the material being drilled.

The range covers everything from HVAC work in tight spaces where mobility is essential to large-diameter coring through thick concrete for infrastructure repair.

About VEVOR

Company Name	VEVOR
Established	2007
Headquarters	Shanghai, China
Sales Network	More than 50 countries worldwide; products shipped directly from the factory to 200 warehouses globally (as of March 10, 2026)

BRAEMAR

BRAEMAR specializes in diamond core drills engineered for precision machining of hard, brittle materials such as sapphire and quartz. The lineup also handles micro-diameter work with minimal runout and is capable of large-diameter and compound machining.

The brand's products are a strong fit for fine machining applications—such as semiconductor wafers and optical components—where even minor chipping or thermal deformation cannot be tolerated.

About BRAEMAR

Company Name	Braemar USA
Established	Not listed on the official website
Headquarters	2003 East 5th Street BLD 1, Tempe, AZ 85288
Sales Network	Quote requests and inquiries handled through the official website

Milwaukee

Every model in Milwaukee's diamond core drill lineup runs on battery power, eliminating the need to bring in a generator or run extension cords. The ability to start drilling immediately on jobsites where power has not yet been connected makes it a strong fit for contractors who want to cut prep time and put more hours into productive work.

The handheld models feature a patented clutch and other safety technology that instantly arrests kickback when the bit binds, reducing the risk of operator injury on the job.

About Milwaukee

Company Name	Milwaukee Tool
Established	1924
Headquarters	13135 West Lisbon Road, Brookfield, WI 53005-2550, USA
Sales Network	Sold through a network of authorized distribution partners, both online and in-store

Epiroc

Epiroc's diamond core drilling rigs handle everything from tunnel construction with active rockfall risk to large-scale development requiring deep ground investigation. The lineup features products built to solve civil engineering challenges that are beyond the reach of standard construction equipment.

With options ranging from self-propelled automated underground rigs to compact units that can be helicopter-deployed to cut access road costs in mountainous terrain, Epiroc is well suited for specialist civil contractors that take on demanding infrastructure projects and non-standard construction methods.

About Epiroc

Company Name	Epiroc AB
Established	2018 (* Spun off from Atlas Copco)
Headquarters	Sickla industriväg 19, 131 54 Nacka, Sverige
Sales Network	Operations and sales in approximately 150 countries, with a regional sales structure directing customers to local country websites (as of March 10, 2026)

DEWALT

DEWALT's diamond core drill lineup is built around a cordless drill body paired with a dedicated stand and a wide range of genuine core bits. Running on battery power while maintaining high output for large-diameter concrete coring is a defining strength of the system.

It is well suited for MEP and HVAC penetration work, as well as close-quarters coring near walls and ceilings. The ability to transport the rig into confined spaces without disrupting the workflow makes it a strong choice for concrete jobsites where both mobility and precision are required.

About DEWALT

Company Name	DEWALT (a brand of Stanley Black & Decker)
Established	1924
Headquarters	Parent company Stanley Black & Decker: 1000 Stanley Drive, New Britain, CT 06053, USA
Sales Network	Authorized dealer locator and service center finder available on the official website

Eibenstock

Eibenstock is a German manufacturer with a clearly defined lineup that spans dry-only compact models, versatile wet/dry combination units, and high-power machines built for continuous heavy-duty work. The company manufactures the majority of its components in-house and supplies products under strict quality control geared toward long-term operation.

It is a brand well suited for jobsites that want to work efficiently without over-specifying equipment.

About Eibenstock

Company Name	Elektrowerkzeuge GmbH Eibenstock
Established	1919
Headquarters	Auersbergstraße 10, 08309 Eibenstock, Germany
Sales Network	Sold through qualified specialist dealers. A dealer search function and direct inquiry contact are available on the official website.

Makita

Makita's diamond core drill lineup is organized by hole size—from lightweight, easy-to-maneuver units to heavy-duty machines for large-diameter work. Genuine accessories including extension bars and water tanks are available, and the system is designed to be easy to configure for deep-hole work and specific water supply requirements.

It is well suited for contractors who need to match the right machine to the scale of each project for pipe penetrations and MEP installation work.

About Makita

Company Name	Makita Corporation
Established	1938 (founded 1915)
Headquarters	3-11-8 Sumiyoshi-cho, Anjo-shi, Aichi Prefecture, Japan
Sales Network	Direct sales offices in approximately 50 countries worldwide (as of March 23, 2026)

WEKA

Built around a philosophy of compact size, light weight, and high output, WEKA's lineup spans handheld compact units to water-cooled large-diameter machines. The design also emphasizes practical usability—tools that can be deployed effectively based on the operator's working posture and available installation space.

With a stated commitment to long-term spare parts supply, WEKA is a brand well suited for organizations that want to factor serviceability and long-term operation into their equipment selection decisions.

About WEKA

Company Name	WEKA Elektrowerkzeuge KG
Established	1988
Headquarters	Neubulach-Altbulach, Germany
Sales Network	Approximately 80 domestic partners in Germany, 100+ international sales partners, and 100+ certified service partners worldwide (as of March 26, 2026)

CABEL

Since its founding in 2001, CABEL has built its lineup around in-house motor manufacturing—producing the core component of its power tools under its own roof and putting quality control and reliability testing at the center of its operations. The lineup spans compact lightweight units for tight-space MEP work to higher-output machines for larger-diameter coring.

With a track record of supplying major companies both domestically and internationally, CABEL is a brand well suited for contractors looking for a purpose-built core drill backed by a manufacturer with full control over its own drivetrain.

About CABEL

Company Name	CABEL Co., Ltd.
Established	2001
Headquarters	662-4 Seonggok-dong, Danwon-gu, Ansan-si, Gyeonggi-do, South Korea
Sales Network	Not listed on the official website